[Tutorial] Cheaper Way To Make Bullets Realistic

[Solarium]

Constructive comments appreciated as it's my first time doing a tutorial  

Things that you will need:
- Light Hunter Revolver's Bullets
- Wall Putty (less than 500g)
- RJ 18k Gold Spray
- A pair of scissors OR cutting pilers



This is how the LHR's Bullet will look like






Use a pair of scissors OR cutting pilers to cut the bullets out. *Note that there will still be rough edges at the side of the bullet so do trim it or sand it*





This is how it will look like after sanding the side






Now, add wall putty in the bullet (this is to add weight to it but it will not be as heavy as a real bullet, at least there's weight in it) You can choose to use other stuff that you think will increase it's weight.








After the putty have set/dry, you will notice a layer that is not filled at the top.
Then fill the top with putty again






This is how it will look like after adding more putty to the top





Make sure you do this before letting dry: Use a straw and gently make a mark on the top of the putty.






Now it's time to spray the bullets !   1-2 layers will do.










Difference between the original colour and after painting



Do rate this tutorial from 1-10 Thanks.  

[staromega]

rating 1.  nothing new, cut, fill the hole and paint.  so 1 for the effort to share.

Was thinking that you might join the stack into 1, that shall impress me.  But then in the end just cut and spray, wow epic turn off.