[Tutorial] How to add Weight to the M4 RIS Carbine Rifle

[boardrider02]

hi guys, how do you remove the orange muzzle so that i can split the chamber?thks

[randomtrader....]

hi guys, how do you remove the orange muzzle so that i can split the chamber?thks

You can pry it out.. on the right side,inside the rails there is one more screw that holds the barrel..

[Swat-unit]

be careful with it. i cracked mine in the process

[neonzap]

Well, you can don't remove add weight to barrel marh... not much diff... So you can don't care about the orange muzzle

[Swat-unit]

Well, you can don't remove add weight to barrel marh... not much diff... So you can don't care about the orange muzzle

unless you want to put silencer

[Domina8]

for me,i removed the internals as the sound and vibration is childish
But if you want the vibration,you might want to avoid puttying those parts,and just be careful when you putty..

thanks!

[boardrider02]

i mean without removing the muzzle, how to split the whole gun in half?thks.

[Swat-unit]

i mean without removing the muzzle, how to split the whole gun in half?thks.

you need to remove the muzzle in order to split the gun

[Toys_god_of_War]

This method I am now trying out is a less messy way of adding putty.

Now we know that as SG people, we are obsessed with plastic bags.

In an effort to recycle, I filled the recycles  bags with putty and then press in to conform the shape of the models.

[marcus]

should i add metal bolts or nuts to make it heavier??
 

[sgtcoxj]

I'm going to say no because if it's not done right they with move and rattle

[alpha actual]

hey, after i add putty in mine i try to screw it back together but never close properly! always have like a gap in the middle! can someone give me a solution please? thanks guys! 

[xing221]

i think you added tooooooo much putty, try removing some

[armyfan]

when u put the white stuff will it corrupt the electronics in the m4a1 RIS carbine rifle?

[randomtrader....]

The electronics is quite childish and useless,so we will remove it and stuff all the putty in.

[richie3345]

Lol.white stuff.if u still want the electronics,u can still use the putty or'white stuff' u can still use it,just dont let them touch the electronics,like fill up the spaces without electronics.

[Solarium]

For the stock, I pulled the triangle thing already but cant get the stock out, will it like slide out or must apply force to pull it out?

[UnknownGod]

for me,i removed the internals as the sound and vibration is childish
But if you want the vibration,you might want to avoid puttying those parts,and just be careful when you putty..

for me , i just covered everything up with putty and let it dry because it saves putty and the sounds are so annoying