[Tutorial] The Kimber Custom / OPS MRS .45

[Toys_god_of_War]

This is a note for all:

The two type of OPS-M.R.P Cal.45 are built slightly different;


The non silencer type has a red O plastic ring.



The silencer type has no red O plastic ring in order accommodate the suppressor.
The suppressor can be removed but there will be a red stick inside.


I broke a sample to show the big gaping O shaped hole.



Note: you can pry gently to remove the handguard to facilitate spray jobs.

[randomtrader....]

all of these pistols looks great,thanks for bringing them in!

[Toys_god_of_War]

The scope can unscrewed and removed.


The laser pointer is wired to the main body.


The "cage" can be removed.


The Insides of the Laser pointer.


Can Remove the "Cage" and attach the laser pointer to the main body.


One example.....I called the "Stiletto" 

[randomtrader....]

this is a very good example..nice work 

[Toys_god_of_War]

Now for adding a coupler joint for the sliencer, screw in the silencer for that assassin mood!


This is 12.7mm coupler ; saw off the hexagon end.

The sawn off end file it to smooth edge and use super glue or Loctite to attach the pistol.



This coupler is used to stick the other end of the silencer.


This is the end result.


Screwing in.......


And done.

Now for a paint job.

[Toys_god_of_War]

Now undergoing paint job. Using metallic black and then dull with "dull lacquer".

[Toys_god_of_War]

My Complete OPS MRP

I have not screwed in the silencer yet as the paint have not set yet.

[Toys_god_of_War]

Oh yes, it is finished and screwed in!

Yes, we can after some planning.....

[4minute36]

 hi bro where u get the 12.7mm coupler
can tell me which shop and wad location...thks  cool

[Toys_god_of_War]

I mostly get the supplies from Jln Besar, Sin Boon Hardware, opp, Kelantan Lane, Sungei Rd area.

The area has a lot of odds & ends for modding.

[4minute36]

Alright thks bro...go check it out 2morow...nice mod btw... teary

[Toys_god_of_War]

I got from hardware store


It is an approx. 10mm wide, can pass as 9mm.


Use H O T glue or "Goop" to hold the nut in place.


Place the two halves backs, use strong glue like super glue to steady the two into place. If you are feeling "extra", sand the seams smooth & flush to be rid of the glue marks. Use grade "320" sandpaper or fine metal file to do.


Any gaps, use putty to fill the gaps. Again, sand the traces smooth after the putty has set.



The cap of the sliencer can taken over. Carefully pry it out.


An opened silencer.


Use H O T  glue or "Goop" to apply the insides.


Insert the Bolt into the silencer case before closing.


Adjust accordingly.
Wait 24 hours before following up on paint job.

[Toys_god_of_War]

Now the glue is 80% set.
Let's see if the idea works.


Screw in slowly

Sucess! It is in!

[oreo]

where u buy the bolt and nut from n how i remove the front part??pls ask my questionT.T asap

[4minute36]

where u buy the bolt and nut from n how i remove the front part??pls ask my questionT.T asap

The bolt and nut you can buy from most hardware shops....
Can find some hardware shops near sungei road...

[oreo]

thank

[oreo]

wat is the name of the shop

[4minute36]

wat is the name of the shop

Sory but I don`t know...
You must learn to look for those shops by yourself

[oreo]

thank by the way

[griphon]

TGOW nuts and bolts label looks like from home fix lol